Mixture and Alligation Solved Questions

Alligation is a shortcut for finding the ratio to mix two things of different value so the mixture comes out at a target average — it’s really just the weighted-average formula worked backwards. This page covers the core rule, the repeated-dilution ("remove and replace") pattern, mixing more than two components, and several fully worked examples.

Written by Mahesh Srivastava, Founder of Pariksha Saathi. Published: 2026-10-03. Editorial standards & corrections

Jump to practice questions ↓

The concept, quickly

  • Alligation rule: to mix a cheaper item (price C) and a dearer item (price D) so the mixture’s mean price is M, the required ratio is cheaper : dearer = (D − M) : (M − C). This only makes sense when M is strictly between C and D — if the target mean is outside that range, the mixture as described is impossible.
  • This is just the weighted-average equation rearranged — you can always sanity-check an answer by computing the weighted average directly from the ratio you found and confirming it equals the target mean.
  • The same rule works for anything with a "concentration" — milk-water mixtures, alloy compositions, even mixing two classes’ average marks — not just prices.
  • For "cost price vs selling price" alligation questions (like diluting milk with free water to make a profit), treat water’s cost as ₹0 and work out the mixture’s effective cost price from the profit percentage first, before applying the ratio formula.
  • For mixing three or more components at once, the two-term alligation shortcut does not directly apply — fall back to the weighted-average definition: total value of all components ÷ total quantity.
  • Repeated dilution ("remove and replace"): if a container holds volume V of a pure liquid, and each time x units are withdrawn and replaced with water, then after n such operations the pure liquid remaining = V × (1 − x/V)ⁿ. This is a geometric decay, not a linear one — don't just subtract nx.

Worked examples

1. In what ratio should tea worth ₹60/kg be mixed with tea worth ₹80/kg so that the mixture is worth ₹65/kg?

Solution

  1. Using the alligation rule: cheaper : dearer = (80 − 65) : (65 − 60) = 15 : 5 = 3 : 1.
  2. Check: weighted average = (3 × 60 + 1 × 80) / 4 = (180 + 80) / 4 = 260/4 = 65 — matches.

Answer: 3 : 1 (₹60/kg tea : ₹80/kg tea)

2. A trader mixes 20 kg of rice costing ₹40/kg with 30 kg of rice costing ₹60/kg. Find the average price of the mixture.

Solution

  1. Total cost = (20 × 40) + (30 × 60) = 800 + 1,800 = ₹2,600
  2. Total quantity = 20 + 30 = 50 kg
  3. Average price = 2,600 / 50 = ₹52/kg

Answer: ₹52/kg

3. A mixture of 60 litres contains milk and water in the ratio 2 : 1. How much water must be added to make the ratio of milk to water 1 : 2?

Solution

  1. Milk = (2/3) × 60 = 40 L, Water = (1/3) × 60 = 20 L.
  2. Adding water doesn’t change the milk, so if x litres of water are added: 40 / (20 + x) = 1 / 2
  3. 80 = 20 + x → x = 60 litres. Check: 40 : (20 + 60) = 40 : 80 = 1 : 2.

Answer: 60 litres

4. A milkman mixes water (free) with milk and sells the mixture at the same price as pure milk, thereby gaining 20%. Find the ratio of water to milk in the mixture.

Solution

  1. Let the price of pure milk (and the selling price of the mixture) = ₹6/litre. A 20% gain means the mixture’s own cost price = SP ÷ 1.2 = 6 ÷ 1.2 = ₹5/litre.
  2. Apply alligation with water (₹0) as the "cheaper" item and milk (₹6) as the "dearer" item, mean = ₹5: water : milk = (6 − 5) : (5 − 0) = 1 : 5.

Answer: 1 : 5 (water : milk)

5. Three varieties of rice costing ₹20/kg, ₹25/kg and ₹30/kg are mixed in quantities 10 kg, 20 kg and 30 kg respectively. Find the average price of the mixture.

Solution

  1. With three components, use the weighted-average definition directly instead of the two-term alligation ratio.
  2. Total cost = (10 × 20) + (20 × 25) + (30 × 30) = 200 + 500 + 900 = ₹1,600
  3. Total quantity = 10 + 20 + 30 = 60 kg
  4. Average price = 1,600 / 60 = ₹26.67/kg (80/3)

Answer: ₹26.67/kg (80/3)

6. A container has 40 litres of pure milk. 8 litres are withdrawn and replaced with water, and this process is repeated once more. Find the quantity of pure milk left after the two operations.

Solution

  1. Each operation removes a fraction x/V = 8/40 = 1/5 of whatever is currently in the container.
  2. After n operations, pure liquid left = V × (1 − x/V)ⁿ = 40 × (1 − 1/5)² = 40 × (4/5)²
  3. = 40 × 16/25 = 25.6 litres

Answer: 25.6 litres

Common mistakes and more worked examples

This section was added on 11 November 2026. It was drafted with AI assistance and checked by a second, independent pass, with every number recomputed. Published by Mahesh Srivastava, who corrects any error you report.

Common mistakes

  • Writing the alligation ratio in the wrong order. The difference (D − M) belongs to the cheaper item: for tea at ₹60/kg and ₹80/kg with a mean of ₹65/kg, cheaper : dearer is 15 : 5 = 3 : 1, not 1 : 3.
  • Taking the wrong cost price in profit questions. A 20% gain on a selling price of ₹6 means CP = 6 ÷ 1.2 = ₹5, not 6 × 0.8 = ₹4.80; the wrong cost turns the correct water : milk ratio of 1 : 5 into 1 : 4.
  • Alligating the ratio terms instead of fractions when mixing two mixtures. For milk-water mixtures in the ratios 3 : 1 and 2 : 3, work with the milk fractions 3/4 and 2/5, and write the target as a fraction too.
  • Subtracting linearly in remove-and-replace questions. Taking 8 litres out of 40 litres of milk and replacing it with water, twice, leaves 40 × (4/5)² = 25.6 litres of milk, not 40 − 16 = 24 litres, because the second withdrawal is already part water. If the amounts differ, multiply the separate factors: removing 8 litres and then 5 litres, topping up with water each time, leaves 40 × 4/5 × 7/8 = 28 litres.
  • Changing the part that stays fixed. When only water is added to a milk-water mixture, the milk does not change, so set up milk ÷ (old water + x) = new ratio instead of scaling both parts.
  • Reading the ratio in the wrong unit. The alligation ratio is in whatever unit the prices or concentrations are measured per: prices per kg give a ratio by weight, and concentrations as a share of volume give a ratio by volume.

More worked examples

7. Vessel X contains milk and water in the ratio 3 : 1, and vessel Y contains milk and water in the ratio 2 : 3. In what ratio should the contents of X and Y be mixed to get a mixture with milk and water in the ratio 3 : 2?

Solution

  1. Alligate on the fraction of milk, not on the ratio terms. Milk in X = 3/(3 + 1) = 3/4, milk in Y = 2/(2 + 3) = 2/5, and milk in the target = 3/(3 + 2) = 3/5.
  2. Y has less milk, so it plays the "cheaper" item and X the "dearer" one. Y : X = (3/4 − 3/5) : (3/5 − 2/5) = 3/20 : 4/20 = 3 : 4, so X : Y = 4 : 3.
  3. Check with 16 litres of X and 12 litres of Y: milk = 12 + 4.8 = 16.8 litres, water = 4 + 7.2 = 11.2 litres, and 16.8 : 11.2 = 3 : 2.

Answer: 4 : 3 (X : Y)

8. A trader has 48 kg of rice. He sells part of it at a 12% profit and the rest at a 4% loss, and makes a 6% profit on the whole. How many kilograms did he sell at a profit?

Solution

  1. Treat the profit percentages as the values to alligate: the loss is −4%, the profit is +12%, and the overall result is +6%. This works because every kilogram has the same cost price.
  2. Loss part : profit part = (12 − 6) : (6 − (−4)) = 6 : 10 = 3 : 5.
  3. Profit part = 48 × 5/8 = 30 kg; loss part = 48 × 3/8 = 18 kg.
  4. Check with a cost of ₹50/kg: profit on 30 kg = 12% of ₹1,500 = ₹180; loss on 18 kg = 4% of ₹900 = ₹36. Net gain = ₹144 on a total cost of ₹2,400, which is 6%.

Answer: 30 kg

9. A container holds 80 litres of pure milk. A certain quantity is taken out and replaced with water, and this is done once more with the same quantity. The container then has 45 litres of milk. How many litres were taken out each time?

Solution

  1. Let x litres be taken out each time. Using milk left = V × (1 − x/V)ⁿ with V = 80 and n = 2: 80 × (1 − x/80)² = 45.
  2. (1 − x/80)² = 45/80 = 9/16, so 1 − x/80 = 3/4 (take the positive root, because the fraction of milk left is positive).
  3. x/80 = 1/4, so x = 20 litres.
  4. Check step by step: after the first operation, milk = 80 − 20 = 60 litres. The second operation removes 20/80 = 1/4 of the milk, that is 15 litres, leaving 45 litres of milk and 35 litres of water.

Answer: 20 litres

Try these yourself

Work through these the same way, then check against the answer.

1. In what ratio should rice worth ₹50/kg be mixed with rice worth ₹70/kg so that the mixture is worth ₹55/kg?

Answer: 3 : 1 (₹50/kg rice : ₹70/kg rice). (70−55):(55−50) = 15:5.

2. A shopkeeper mixes 15 kg of sugar costing ₹30/kg with 25 kg of sugar costing ₹42/kg. Find the average price of the mixture.

Answer: ₹37.50/kg. Total cost = 450 + 1,050 = 1,500; total qty = 40; 1,500/40.

3. A mixture of 45 litres contains milk and water in the ratio 4 : 1. How much water must be added to make the ratio 2 : 1?

Answer: 9 litres. Milk = 36 L fixed; 36/(9+x) = 2/1 gives x = 9.

4. In what ratio must wheat at ₹24/kg be mixed with wheat at ₹32/kg to get a mixture worth ₹28/kg?

Answer: 1 : 1. (32−28):(28−24) = 4:4.

5. Rice at ₹18/kg, ₹24/kg and ₹30/kg is mixed in quantities 5 kg, 10 kg and 15 kg. Find the average price of the mixture.

Answer: ₹26/kg. Total cost = 90+240+450 = 780; total qty = 30; 780/30.

6. A vessel has 50 litres of pure milk. 10 litres are withdrawn and replaced with water, and this is repeated once more. Find the milk left after both operations.

Answer: 32 litres. 50 × (1 − 10/50)² = 50 × 0.64.

7. A vessel contains 40 litres of pure milk. 10 litres are withdrawn and replaced with water (a single operation). Find the ratio of milk to water in the resulting mixture.

Answer: 3 : 1. Milk left = 30 L, water = 10 L.

All 13 practice questions on Mixture and Alligation, with answers →

Where this comes up

Mixture and Alligation is named in the Quantitative Ability syllabus of Haryana CET; for the other exams Pariksha Saathi covers, check the quantitative section of your own exam’s official notification. It builds directly on Ratio and Proportion.

Keep practising

Solve the questions above before opening the answers. Explain each step in your own words, then revisit any mistakes.

Start this topic’s quiz →

Explore the lesson library